 |
Camsplitter |
 |
| CamSplitter 2.0 |
|
Have only one webcam device but want to use it in a few software application at the same time?
Here is the product to solve this problem!
Soft Service CamSplitter software allows to use one webcam driver and device in multiple applications without locking the device. This software is designed to work like a bridge between one webcam device and several webcam software applications.
Released: 2006-06-14
License: $29.95
Publisher: Soft Service Ltd
Language: English
Platform: Windows
Requirements: 64Mb RAM minimum
Install: Install and Uninstall
|
Downloaded this software.After installing looks good, and testing to the cam directly works ok.Succeeds with using in 1 yahoo.But if multiple yahoo used, the others give the standard message such as: No webcam found.I also tried this with Yahoo, and MSNMSN did not function, and Yahoo also did not.So...in my situation it was not function.i have windows XP, and all latest updates, almost dayly.The Netherlands
Not good. When I tried to use my webcam on a site I couldn't use the webcam so I had to uninstall camsplitter then everything worked fine again. It was hard to uninstall too, I had to press CTRL+ALT+DEL to stop camsplitter in the processes before I could uninstall.
CamSplitter I am using programs like these to help me stream video onto ustream without using a webcam and this ALMOST worked. So I thought it was a fair program but not exactly what I was looking for.
Screwed up my system. Installed and then unable to use a camera at all (windows vista could explain everything)
Cam aplitter saves time I have found that cam splitter saves time by not havving to log off one application to open another application that uses the camera. Was just what I wanted.
| WebCamSplitter Pro 1.4 |
|
When working with WebCamSplitterPro you can use one and the same webcam at one time in multiple applications. It is known that if you use a webcam in any application it is locked by this application. Hence other applications do not receive any image from this webcam. WebCamSplitterPro can solve this problem. Also it is possible to use a media file instead of video capture device. Added support DV cameras and virtual audio device driver.
Released: 2012-01-20
License: $39.95
Publisher: Verysoft
Language: English, Russian
Platform: Vista, Windows, Mobile
Requirements: Pentium III or AMD CPU, RAM 128mb, DirectX 8.1 0r higher.
Install: Install and Uninstall
|
It worked fine for my 2 applications that need to run together.They were:1. Using WebCamXP to make the camera stream available on the internet.2. Using my own OpenCV program to analyse the video stream and calculate the optical flow.It would be nice if WebSplitter Pro could also do the job that WebCamXP is doing for me, so that I need fewer 3rd party components.
Funktioniert gut, habe es probiert. Aber es entspricht nicht meinen Vorstellungen, habe es daher wieder entfernt. Aber für andere sicher gut geeignet.
i want to install hpwebcam to enable me video activities and camera with audio my laptop lack such facility
Trying to solve a problem I have a dv6573cl hp laptop that has quick play on it with windows vista ultimate os. The laptop has a built in webcam, and this is the problem. If I restart the computer and click on Quick play the webcam works. If I start msn live instant messenger and chose webcam splitter the camera works but there is no way to chose the camera for quick play and once you use it in another program the hpwebcam can not be used without a restart. If I can figure out how use webcam splitter to run the hpwebcam in ...
web splitting issues for me i cannot use the web splitter to split my webacam in 4 windows ,it says there is an errotr,yet it shows onn one,and stills of screens or files on others,.also i cannot make the pictures bigger and when you select ia better resolution it sti ll atays the same size.i am not happy about this.what am u doing wrong,my webcam is very good logiteck face tracking tyoe 240 odd dollars aust.yetr i vcnnot split.?
| CamZoomer 2.7 |
|
USB based webcams usually supports dfferent resolutions for video and very often maximum is 640x480 (VGA). But that resolution is not using in most cases, we use only 320x200 or so for online video conferencing purposes, becuase 640x480 is too big for realtime video over the internet. That allows to do zoom and move camera! CamZoomer is a middleware application between webcam application and real webcam driver with tilt/pan/zoom features
Released: 2007-04-23
License: $39.95
Publisher: Soft Service Ltd
Language: English
Platform: Vista, Windows
Requirements: Pentium 1.2GHz or better, 256Mb RAM
Install: Install and Uninstall
|
Thanks for the software, but unfortunately it doesn't do what I thought it would.
smilecam control (301 P camera) I wanted controls for a Smilecam that I no longer used the ezwebcam 21 software with. But you have discontinued controls for Smilecam. If you still have such capabilities, I'd like to know about it.
| Splitcam Clone Video 3.19 |
|
SplitCamera is a freeware virtual video clone and video driver for connecting several applications to a single video capture source. Usually, if you have a camera connected to your PC, you cannot use it in more than one application at the same time, and there is no standard Windows options that makes it possible. SplitCam allows you to easily multiply your video source in any conferensing software like ICQ, Yahoo, MSN Messenger, or whatever..
Released: 2005-12-06
License: Free
Publisher: Splitcam Clone Video
Language: English
Platform: Windows
Requirements: 128 RAM
Install: Install and Uninstall
|
I loaded Splitcamera and when I try to run it I get two error windows and Splitcamera does not run. This is being loaded on a Windows 98 machine and it has an old Connectix Quickcam2 connected to the printer port. I sent an e-mail to your support e-mail address. Attached to the e-mail is a Word document. In that document are screen prints of the two error messages. Thank you, John
Splitcam Cons Splitcam did exactly what I needed it to do for my video camera. The problem that I ran into, is that it didn't split my video camera's microphone. Without this ability, splitcam is worthless to me. Is there plans on incorporating this feature into your software in the future?
| Video Chat Splitter 3.27 |
|
Video Chat Splitter driver allows you to easily multiply your web-camera (any models), video cameras ( any model: analog or ditial : VHS, DV, TV-IN or TV-tunner ) in video chat or video conference software like ICQ, Yahoo Messenger, MSN Messenger, Skype Video, Camfrog, AOL AIM, Pal Talk, or whatever... and to broadcast it to many users at a time.
Released: 2006-03-01
License: Free
Publisher: Video Chat Splitter
Language: English
Platform: Windows
Requirements: DirectX 9 , RAM: 128Mb
Install: Install and Uninstall
|
Trial version will not play..Every time the program tries to start, the computer will crash the program. I have a full tower Intel with plenty of memory and parts necessary to use the program...Something in the system balks. I have a Logitec 910 web cam
Easy to use Video Splitter Easy to use, works with all types of Video Chat software.Very recommendable.
Comments on Splitcam This program enables me to use my video camera as a webcam. In othe rwords it does exactly what I hoped it would do.
| Split Video Chat for Video Conference 1.09 |
|
SplitCamera is a freeware virtual video clone and split video capture driver for connecting several applications to a single video capture source. Usually, if you have a web camera or video camera connected to your computer, you cannot use it in more than one application at the same time, and there is no standard Windows options that makes it possible. Split Camera driver allows you to easily multiply your web-camera (any models), video cameras (
Released: 2006-02-24
License: Free
Publisher: Video Chat Spit Systems
Language: English, ChineseTraditional, Czech, Danish, Finnish, French, German, Hungarian, Italian, Romanian, Russian, Spanish, Turkish
Platform: Windows
Requirements: DirectX 9 , RAM: 128Mb
Install: Install and Uninstall
|
Nice but not yet fully tried I liked the features you have put inside the software but I have to still see all the features and search if any other improvements are necessary. I will comment my review later after through testing.
not working I get worried when I haven't sent you anything and the viewer pops up with my video and then goes back to my start up again without letting me access the site. Why is it doing that? Do I have someone else accessing my site?
Newbie User - Seems to be doing the job I test-ran the program as soon as I installed it, and got an idea what to do, and it was easy, and looked like it should work. Now, a week later, I had occasion to chat in yahoo messenger and also in a conference room on a site. It went smooth as could be. This is going to be very useful!
Jay in Atlanta
Magic in Making Comm Its a great experience.Thanx...............................................................................................................................
it`s a great product It's a great product. The features are great because it allows multiple applications to run based off my one webcam.
|